Windows user manual

Your cameras. One place to manage them.

Connect Fortivia IPCam phone cameras and compatible ONVIF security cameras to Fortivia ONVIF Manager. Watch them together, control each live view, and keep recordings on your Windows PC.

Windows x64Local networkONVIF & RTSP

Before you begin

Prepare the PC and cameras.

On your Windows PC

  • Use the Windows x64 package; Windows 11 is the initial target.
  • Get the installer or extract the complete ZIP from the Fortivia Windows download page. Keep the application files together.
  • The standard package includes the runtime and live-view components. Add FFmpeg separately if you want recording.
  • Allow the app through Windows Firewall on your trusted private network when prompted. Do not disable the firewall.

On each camera

  • Connect the camera and PC to the same reachable home or office network. Guest Wi-Fi and client isolation can prevent discovery.
  • Enable ONVIF in the camera settings. Some brands require a separate ONVIF user.
  • Have the camera's IP address, ONVIF service address, username, and password available.
  • For Fortivia IPCam, keep the phone powered and the camera app running with ONVIF enabled. Camera permissions and its current license must permit the selected features.

This is a local camera manager. It does not provide cloud remote access, PTZ control, motion-alert notifications, or background Windows-service recording. ONVIF Media1 and RTSP/TCP compatibility depends on each camera; Media2-only cameras may not work.

First camera

Discover, test, and save.

  1. Launch Fortivia ONVIF Manager and click Scan. The scan window searches the local network. Click Rescan if the camera was not ready.
  2. Double-click the discovered camera to open ONVIF Device Settings.
  3. Give it a recognizable Device name, such as “Front entrance.” Check the ONVIF address against the camera's configuration.
  4. Leave Connection method set to ONVIF — discover stream profiles. Enter the camera's Username and Password.
  5. Click Test Connection. After a successful test, choose a Stream profile from the available camera profiles.
  6. Click Play Stream to inspect the live video, then Save ONVIF Device to add the camera to your main view.
  7. Repeat for your other cameras and choose a layout from the main toolbar.

Save and Play become available after a successful connection test. If you change the address, connection method, or credentials, test again before saving. Keep passwords private; use Show password only when you can safely check the entry.

Phone cameras and alternative connections

Add Fortivia IPCam.

Install Fortivia IPCam on a compatible iPhone or Android phone. Enable its ONVIF service, keep the app active, and scan from the Windows manager. Use the credentials configured in the camera app, not your Windows password.

If ONVIF authentication fails

If a Fortivia IPCam returns HTTP 401 during the ONVIF test, try its direct video connection:

  1. Open that camera's ONVIF Device Settings and enter its credentials.
  2. Click Use Fortivia RTSP. The app selects Direct RTSP — connect to video stream and fills the Fortivia stream address.
  3. Click Test Connection. The app waits for decoded video frames, which can take up to about 25 seconds.
  4. Once successful, use Play Stream and then Save ONVIF Device.
rtsp://<camera-IP>:8554/live/main

Replace <camera-IP> with the phone's current local IP address. Keep ONVIF enabled in Fortivia IPCam because that setting also starts its RTSP server. The direct connection uses the camera's current resolution and shows Direct stream (camera resolution) instead of ONVIF profiles.

For another camera brand, select Direct RTSP and enter the stream address supplied by its manufacturer. Do not assume the Fortivia path or port applies to other brands. Enter credentials in the separate fields rather than embedding them in the URL. Direct RTSP bypasses ONVIF profile negotiation; it does not repair an ONVIF authentication failure.

About Fortivia IPCam · Understand ONVIF and RTSP

Your central camera view

Choose a layout. Control each camera.

Select List, 2×2, 3×2, 3×3, or 4×3 on the toolbar. Use the previous/next page arrows when cameras extend across grid pages. Smaller windows may scroll to keep controls usable.

Camera-card controls and indicators
ControlHow to use it
PowerTurn this live stream on or off. An off-camera placeholder or its Play icon can also turn it on. The on/off choice is remembered for the next launch.
AudioMute or unmute this camera's live audio, if available. Streams start muted after launching the app. This does not remove audio from recordings.
Record / StopStart a local recording with the red circle; stop and finalize it with the red square. FFmpeg is required.
GalleryOpen completed recordings belonging to this camera.
SettingsEdit this camera's name, address, connection method, credentials, or profile. Test changed connection details before saving.
DeleteRemove this saved camera and stop its stream and recording. Existing recording files stay on disk.
Fit / FillFit preserves the full image and its proportions, with bars if needed. Fill stretches the full image to the view without cropping; proportions may change. This affects display, not recorded video.
Full screenClick the floating icon at the video's top-right. Restore with the corner icon, Esc, or F11. Current streaming, audio, and recording continue.

Camera headers show the address, stream resolution, connection method, and audio state. Look for Live, Off, Connecting, or Unavailable. An unavailable camera shows a retry countdown. Hover over icons and status messages for their full descriptions.

Local recording

Keep the moments you need.

Install the separate FFmpeg dependency

  1. Close the manager. Start from the FFmpeg download page and follow its Windows build links. Choose a Windows x64 build; a static build is simplest.
  2. Extract ffmpeg.exe from the download's bin folder and place it under tools/ffmpeg inside your manager installation or extracted ZIP folder.
  3. If using a shared build, also copy that build's matching DLLs into the same folder. Keep the provider's license files.
  4. Reopen the manager. In Settings, select a dedicated video folder and clip length, then save.
FortiviaOnvifManager/
  FortiviaOnvifManager.exe
  tools/
    ffmpeg/
      ffmpeg.exe

The per-user installer normally uses %LOCALAPPDATA%\Programs\Fortivia\ONVIFManager. For the ZIP, use your extracted app folder. The manager does not search PATH or download FFmpeg automatically. More FFmpeg setup details.

Start and stop recordings

Click a camera's red Record circle, or Record All on the toolbar for available cameras. A red REC timer shows progress. Click its Stop square or Stop All to finish. Recording does not start automatically when the application opens.

Recordings are segmented into MP4 clips; the default clip length is 120 seconds. Actual boundaries follow the camera's keyframes. Video is copied at the stream's resolution, with camera audio included when available. Live viewing and recording use separate camera connections, so the camera must allow both.

Keep the PC awake, the app running, and the recording drive connected. Minimizing does not stop recording; closing the app attempts to finalize clips. Incomplete .partial.mp4 files do not appear in the gallery. A power loss can leave an unfinished file.

Application settings

Choose where and how to record.

Settings on the main toolbar
SettingWhat it changes
Clip length (seconds)The requested length of recording segments. Default: 120 seconds. Camera keyframes affect exact boundaries.
Video resolutionSelects compatible ONVIF profiles: Standard (saved camera profile), HD, 640×480, or 1920×1080. It does not upscale or transcode recordings. Direct RTSP uses the camera's resolution.
Video root folderChoose a writable dedicated folder. Each device gets its own subfolder. The default is under your Windows Videos folder at Fortivia ONVIF Manager/videos.
Maximum Storage (GB)Default: 50 GB. Before recording starts, eligible oldest completed video files are permanently removed if usage exceeds this value.
Retry interval (seconds)Default: 60 seconds; range: 10–86,400. Enabled cameras retry failed or interrupted streams independently. Manually turning a camera on attempts a connection immediately.

Use a dedicated recording folder. Storage cleanup includes recognized video files throughout that root and its device subfolders, including folders for removed devices and videos copied there manually. Active/incomplete files are protected. The check runs before recording starts, not continuously: active clips can exceed the limit. Saving a lower limit does not immediately delete files. This is not a disk-space reservation or backup.

The bottom status bar reports device, live, and recording counts plus approximate used/maximum video storage. Storage information refreshes in the background, normally once per minute. Hover over the storage indicator to see the folder. Back up important clips outside the managed recording root.

Saved devices and preferences

Return to your camera workspace.

The app remembers camera connections, stream on/off choices, layout, and settings. On startup, cameras left on reconnect automatically; those left off stay off. Audio starts muted, and recording requires a new user command.

Use each camera's Settings icon to update changed credentials or addresses. If a camera's IP changes, rescan and open its matching saved device to check the connection. A router DHCP reservation can help keep a camera address stable.

Deleting a device removes it from the saved list, stops its stream, and finalizes its recording. It does not delete recorded files. Add it again through Scan when needed; preserve important footage separately before reorganizing devices.

Use Language next to About to select English, Simplified Chinese, Traditional Chinese, Japanese, Spanish, Hindi, French, German, Portuguese, Russian, Korean, or Indonesian. The choice applies immediately and is saved. About shows the installed version and support information.

Settings and credential storage

Configuration is stored at %LOCALAPPDATA%\Fortivia\ONVIFManager\app.config. Passwords are protected for the current Windows user using Windows DPAPI. Copying this file to another account or PC does not transfer usable passwords; re-enter camera credentials there. Use the app to change settings and close it before any manual configuration edits.

Stored-password protection does not mean every camera connection is encrypted. ONVIF HTTP and ordinary RTSP may travel without transport encryption. Use trusted networks and do not expose camera ports directly to the public internet.

Troubleshooting

Get a camera back online.

Common problems and next steps
What you seeWhat to try
Scan finds no camerasCheck camera power, ONVIF enablement, and that the PC and cameras can reach each other. Allow the app on the private-network firewall. Guest Wi-Fi, VPN routing, separate subnets, or blocked UDP multicast port 3702 can prevent discovery. Rescan after fixing connectivity.
HTTP 401 or login failureCheck the camera's ONVIF account and exact password, including accidental spaces. For Fortivia IPCam, try Use Fortivia RTSP, then Test Connection. Other camera brands may require enabling a dedicated ONVIF user.
Save is disabledRun Test Connection successfully after your latest changes. Direct RTSP testing must receive decoded video frames before Save is enabled.
ONVIF connects but video failsTry another available profile, check camera-advertised stream addresses and credentials, and confirm its format is supported. Media2-only services and some camera codecs/profiles may be incompatible.
Camera says UnavailableCheck its current address and network. Keep Fortivia IPCam active and ONVIF enabled. Watch the retry countdown; adjust Retry interval in Settings if appropriate.
Live video works but recording failsCheck tools/ffmpeg/ffmpeg.exe, matching DLLs for shared builds, folder write permissions, available disk space, and the camera's simultaneous-stream limit. Read the camera card's recording error.
No soundUnmute the camera card, check Windows output volume, and confirm the camera stream includes audio. The audio button controls listening, not two-way talk.
Gallery is empty or a clip is missingCheck the selected device, video root, and date filter; click All Dates and Refresh. Stop recording to finalize a clip. Incomplete .partial.mp4 files are intentionally excluded.
Storage stays above the limitCleanup is checked at recording start. Active or incomplete clips can keep usage high; unreadable or protected files can prevent cleanup and block new recording. Review files before removing anything manually.
Share or thumbnails unavailableCheck that the completed clip still exists and is readable. For sharing, use Show in Folder as a fallback. Detailed List remains available if thumbnail generation fails.

Need help with your setup?

Contact Fortivia with the installed app version from About, Windows version, camera model, connection method, and the visible error message. Remove passwords and private camera details from screenshots and logs before sending them.

Manual updated November 15, 2026, from the current application source. Controls and available features may differ in older installed builds. Use cameras only where you have permission to record.

Back to top ↑