Fortivia Cam + Viewer · How-to user manual

Set up. Watch. Stay connected.

A practical guide to installing Fortivia Cam and Viewer, pairing your phones, watching live, speaking, reviewing events, and sharing access or video.

iOS & AndroidCam + ViewerLive · Speak · Events

How to

Choose a camera phone and a Viewer phone.

Camera phone: Fortivia Cam

Use the phone that will stay in the room. Connect it to power and a reliable network, and position it securely with the lens unobstructed.

Everyday phone: Fortivia Viewer

Use this phone to watch, speak, review events, and share selected clips. Supported iPhone and Android combinations can connect to each other.

  1. On an iPhone, open the App Store. On Android, open Google Play. Find Fortivia Cam for the camera phone and Fortivia Viewer for the viewing phone. Check the Fortivia publisher and app icon. Use the product page if you need help identifying the apps; use an invitation only when you have been given a preview build.
  2. Install and open each app. On Cam, allow Camera and the microphone access needed for audio. On Viewer, allow Camera when scanning a QR code and Microphone when using Speak.
  3. Allow Local Network access on iOS when prompted. Allow notifications if you want motion alerts. Approve Photos/media access when saving or browsing requires it.
  4. Connect both phones to the same trusted Wi-Fi network for the first setup. Keep Cam open with a working preview.

How to

Prepare the camera before pairing.

  1. Open Cam’s main menu and choose Settings. Choose the front or back camera and a supported recording resolution. Confirm that the preview shows the area you want.
  2. Set recording duration and storage limits for the space available. Keep important recordings somewhere outside the app before automatic cleanup can remove them.
  3. Review Screen Timeout. New Cam settings default to two minutes; an existing saved choice can remain. Use the in-app screen controls, keep the app active, and check that capture continues in your intended setup. Locking the phone or switching apps can interrupt iOS capture.
  4. Open License. Check trial/subscription status and License service status. A monthly/yearly subscription or eligible trial permits remote features; a local-only license requires the same reachable local network.
  5. Return to the camera preview. You do not need to start a manual recording just to watch live video.

How to

Scan Cam’s private setup QR.

  1. On the camera phone, open the main menu → Fortivia Cam Setup Info. Wait for synchronization to finish and the current setup QR to appear.
  2. On the viewing phone, open Fortivia Viewer. Tap + or Add Cam / Add Server, then Scan QR Code.
  3. Point Viewer’s scanner at the setup QR on the camera phone. Allow camera access if asked. Check the populated camera name and connection details, then use the add/save control to keep the entry.
  4. Open the saved camera and confirm the live view. Use Test Connection in the add/edit screen when you need to check the local endpoint.
  5. For a distant Viewer, privately send the setup QR using the available sharing control. The recipient can display the image on another screen and scan it inside Viewer. Do not assume the app can import a QR image directly from Photos.

The setup QR grants camera access. Keep it private. A device ID or IP address alone is not a substitute for pairing credentials. Cam and IPCam on the same phone are separate cameras with separate IDs and setup information.

How to

Open a live view at home or away.

  1. Leave Cam running and connected. In Viewer’s camera list, open the saved Cam’s live view using its stream/play action.
  2. On the same reachable network, Viewer can use the local HTTP connection. Outside that network, Viewer attempts the supported remote connection when the camera’s license and services allow it. You do not need to choose a STUN server manually.
  3. Wait for live movement in the picture, then use the available full-screen and audio controls. Raise the viewing phone’s media volume to listen.
  4. Use the live view’s Record or snapshot control when you want to capture a moment on the Viewer device. Stop recording and wait for saving to finish before leaving the view.
  5. Close live view to end that viewing session. This does not turn off motion detection or delete recordings on Cam.

For a first remote check, keep Cam on Wi-Fi and turn off Wi-Fi on Viewer so it uses cellular data. Remote viewing needs internet access on both devices, an eligible camera license, synchronized camera access, and available signaling/relay services.

How to

Talk through the camera phone.

  1. Open the paired Cam’s live view and wait until the audio connection is ready. Confirm that Cam has microphone permission if you want to hear the camera side.
  2. Tap Speak or the microphone button in Viewer. Allow microphone access. The highlighted microphone / Stop Speaking state indicates that Viewer is sending your voice.
  3. Speak near the Viewer phone. Your voice plays from the camera phone; check that phone’s output volume if you cannot hear it.
  4. Tap Speak / Stop Speaking again to stop transmitting. These controls toggle speech; you do not need to keep the button pressed.
  5. Keep the phones apart or use headphones on Viewer to reduce echo. If the app says audio is not ready, wait for the connection or reconnect before trying again.

How to

Choose what to record and when.

  1. On Cam, enable Motion Detection using the motion control. Choose a balanced sensitivity first; raise it for smaller movements or lower it to reduce unwanted triggers.
  2. If you want timed monitoring, open Motion Schedule, add a schedule, choose days and start/end times, enable it, and save. Review active schedules when motion appears to switch on or off automatically.
  3. Walk through the monitored area and allow the event clip to finish. Motion recording can include pre-event context when the buffer is ready; a clip may take a short time to become available.
  4. For continuous/manual recording instead, tap Record on Cam and tap Stop when finished. Keep the camera powered and watch the recording status.
  5. Allow notifications on Viewer and check its event pre-download settings. Downloading videos on mobile data is a separate option and can use your cellular allowance.

How to

Review an event, then play its clip.

  1. In Viewer, choose the camera and View Events / Events. Use the camera and date filters to find the event you need.
  2. Tap the event or its video action. Viewer uses a saved local copy when available; otherwise it downloads from the camera using a permitted local or remote connection. Keep Cam online during the download.
  3. Wait for downloading/processing to finish, then play and scrub through the clip. If an event includes another clip segment, use the offered clip switch to inspect it too.
  4. If the new clip is not yet available, wait roughly 30 seconds and try again. An event notification can arrive before the video file is finalized.
  5. To inspect footage directly on Cam, open Browse Videos / Recorded Videos or its motion-event list, choose the date or type where available, and tap a completed video.

An event entry is not a guaranteed permanent copy of the video. Camera cleanup, manual deletion, or app removal can make an undownloaded clip unavailable. Save important footage before deleting events, camera entries, or app data.

How to

Send a clip without sharing the camera.

  1. Open the downloaded event video in Viewer, or open a completed recording on Cam. Wait until the video is ready; a clip still being recorded cannot be shared as a completed file.
  2. Tap Share or Share video. On Android, some video lists expose Share by touching and holding the clip. In an iOS playback screen, use the share icon.
  3. Choose Share to Apps to open the phone’s sharing tools, or Save to Gallery / Photos where offered. Grant the requested save permission.
  4. Select the recipient app or file destination and complete its send/save action. Large videos can take time or exceed the destination app’s limit.
  5. Check the receiving app or saved file before removing your only copy. Sharing a video sends that file; it does not give the recipient live camera access.

How to

Let another trusted Viewer connect.

  1. Install Fortivia Viewer on the other person’s phone. The simplest route is to scan the camera’s current Fortivia Cam Setup Info QR again, then save the new entry.
  2. You can also share from an already paired Viewer. Open the saved Cam’s Edit screen, then tap Share to display its access QR. On iOS, swipe the camera row to reveal Edit; on Android, use the saved camera’s edit action.
  3. Tap Share QR Code if you want to send that image privately. On the recipient’s Viewer, open Add Cam / Add Server → Scan QR Code and scan it from another screen.
  4. On the recipient phone, save the camera and open live view. Each Viewer needs a working network; simultaneous sessions remain subject to camera and service limits.
  5. Only share with people you trust. Removing a camera from your own Viewer does not revoke copies already shared with other people. If access has been shared accidentally, contact support for the appropriate credential reset.

A Viewer must already have valid authentication data for the Cam before its Share action can create a usable access QR. If it cannot share, re-pair that Viewer from the camera first.

How to

Keep your camera available.

Common maintenance tasks
TaskSteps
Change camera settingsOpen Cam → Settings. Adjust camera, resolution, audio, storage, screen timeout, and timestamp options; return to preview and check the result.
Manage recordingsUse Browse Videos and its date/type filters. Share important clips before deleting. Read any Delete All confirmation carefully.
Restore a purchaseOpen License. On iOS, use Restore Purchases with the purchasing Apple Account. On Android, use the purchasing Google Play account and refresh/check license status.
Replace or reinstall a cameraOpen its current setup screen after installation and re-pair each Viewer if the camera identity changed. Old QR codes and saved entries may refer to the previous camera instance.
Delete a Viewer camera entrySave needed clips first. Deleting a saved device can also delete that Viewer’s downloaded videos and events; it does not revoke another Viewer’s access.

See the license comparison for the current feature tiers. Purchases belong to the product and store account; installing IPCam alongside Cam does not make them share one camera identity or license.

How to

Resolve a connection or playback problem.

Problems and next steps
What you seeWhat to try
No setup QR / waiting to synchronizeKeep Cam online, check License → License service status, and use Check license status. Wait for access synchronization before sharing. Do not repeatedly reinstall as a first fix.
Works on Wi-Fi, fails over cellularCheck the camera’s trial/monthly/yearly access, its license-service status, and both internet connections. Local-only access does not permit remote P2P.
HTTP 409 / camera_id_conflictKeep the exact error and app version for support. Update to the current identity-aware build and use its current setup QR; do not manually reuse another app’s camera ID.
No live pictureKeep Cam open, allow Camera and Local Network permissions, and check Wi-Fi isolation or VPN routing. Re-pair if the camera was reinstalled.
No voice / microphone deniedAllow Microphone on the relevant phone, check output volume, wait for audio readiness, then reconnect. Separate the phones to reduce feedback.
No event or missing clipConfirm Motion Detection and schedules, the date/camera filter, storage, and camera availability. Wait for a new clip to finish before retrying.
Need connection diagnosticsIn Viewer’s support/diagnostics screen, enable diagnostics, reproduce the problem, then use Export and share. Include the visible error and app version.

Need a hand?

Contact Fortivia with your app version, phone or computer model, operating-system version, the step you were following, and the exact message shown. Remove private media, passwords, pairing codes, and camera links from screenshots before sending them.

Updated November 14, 2026. These instructions follow the available application source and documentation; older store builds may differ.